The HMS Series is designed to provide high power output from VHF Low Band through 960 MHz. It is manufactured for rugged use while combining the latest technology into a space efficient package. These units are totally self-contained with a regulated switching power supply, using only 10 1/2" of vertical rack space and 15" of depth. Internal circuitry monitors several parameters of the amplifier, including forward and reflected power.
Input and output connectors are located on the rear of the unit, making it convenient to connect coaxial cables. TPL has made the unit easy to service if necessary. The amplifier RF deck has all wiring contained in one harness, which can be easily disconnected, allowing only the RF deck to be removed for servicing. A new RF deck could be installed in a matter of minutes.
Input and output connectors are located on the rear of the unit, making it convenient to connect coaxial cables. TPL has made the unit easy to service if necessary. The amplifier RF deck has all wiring contained in one harness, which can be easily disconnected, allowing only the RF deck to be removed for servicing. A new RF deck could be installed in a matter of minutes.
| FEATURES | |
| • | Fully enclosed compact package with switching power supply |
| • | Digital meter monitoring for system evaluation and maintenance, including forward and reflected power. |
| • | Adjustable output power, feedback controlled. |
| • | Alarms for low power, over temperature, VSWR, and fan failure. |
| • | VSWR protection/power reduction. |
| • | Over temperature protection/power reduction. |
| • | Adjustable alarm and protection thresholds. |
| • | Remote monitoring. |
| • | Forced air cooling with three fans. |
| • | Convenient access for amplifier adjustments |
| • | Excellent field serviceability. |
| • | Repeater or base station operation (with coaxial antenna switch relay option). |
| • | Other bands and modes available on special order. |
| SPECIFICATIONS | |
| Power Input | 75 mW to 70 Watts as specified. |
| Power Output | 300 Watts VHF Low Band (29.7-50MHz), 250 or 500 Watts VHF High Band (136-174MHz), 300 Watts UHF (406-512MHz), 250 Watts (806-960MHz). |
| Mode | FM/CW (Linear in some models). |
| Voltage | 120/240 VAC |
| Current | 4 to 15 Amps AC, depending on model. |
| Harmonic & Spurious Attenuation | Exceeds FCC specifications. |
| RF Connectors | Type N |
| In/Out Impedance | 50 Ohms |
| Mismatch Capability | 20:1 VSWR. Infinite on 800 MHz models if isolator option is selected. |
| Remote Monitoring | Overtemp, Low Power, Fan Failure, System Fault, Forward and Reflected Power, and other amplifier parameters. |
| Local Monitoring | Front panel digital display and LED indicators. |
| Overtemp/SWR Protection | Gradul reduction of output power. |
| Operating Temperature | -30° to +50° degrees C. Ambient |
| Duty Cycle | Continuous |
| Weight | 45 pounds |
| Dimensions | 19" W x 10 1/2" H x 15" D |
| Warranty | Three years parts and labor |
| MODEL NO | POWER IN | POWER OUT |
|---|---|---|
| VHF LOW BAND 35 TO 50 MHz | ||
| PA1-3AF-HMS | 2-4 W | 300 W |
| PA1-3BF-HMS | 4-8 W | 300 W |
| PA1-3CF-HMS | 8-15 W | 300 W |
| PA1-3DF-HMS | 15-25 W | 300 W |
| PA1-3FF-HMS | 25-35 W | 300 W |
| PA1-3GF-HMS | 35-70 W | 300 W |
| VHF HIGH BAND 136 TO 174 MHz | ||
| *PA3-2EF-HMS | 500mW-1 W | 250 W |
| PA3-2AF-HMS | 1-2 W | 250 W |
| PA3-2BF-HMS | 2-4 W | 250 W |
| PA3-2CF-HMS | 4-6 W | 250 W |
| PA3-2DF-HMS | 8-12 W | 250 W |
| PA3-2FF-HMS | 15-25 W | 250 W |
| PA3-2GF-HMS | 30-50 W | 250 W |
| PA3-2EG-HMS | 1-2 W | 500 W |
| PA3-2AG-HMS | 2-4 W | 500 W |
| PA3-2BG-HMS | 4-8 W | 500 W |
| PA3-2CG-HMS | 8-12 W | 500 W |
| PA3-2DG-HMS | 15-25 W | 500 W |
| PA3-2FG-HMS | 30-50 W | 500 W |
| PA3-2GG-HMS | 60-100 W | 500 W |
| UHF 400 TO 512 MHz | ||
| *PA6-2EF-HMS | 75-150 mW | 300 W |
| PA6-2BF-HMS | 5-12 W | 300 W |
| PA6-2GF-HMS | 20-45 W | 300 W |
| UHF HIGH BAND 800-960 MHz | ||
| *PA8-2EG-HMS | 10mW-1 W | 250W |
| PA8-2BG-HMS | 4-8 W | 250 W |
| PA8-2CG-HMS | 8-15 W | 250 W |
| PA8-2DG-HMS | 15-30 W | 250 W |
| PA8-2FG-HMS | 30-60 W | 250 W |
| *Input level must be specified at time of order. | ||
 |
 |
 |
 |
 |
 |
 |
 |