| MODEL NO | POWER IN | POWER OUT |
|---|---|---|
| VHF LOW BAND 29.7 TO 50 MHz (L=29.7 - 36 MHz) (M=36 - 42 MHz) (H=42-50 MHz) | ||
| PA1-1AE-MAS | 2-4 W | 60-100 W |
| PA1-1BE-MAS | 4-8 W | 60-100 W |
| PA1-1CE-MAS | 8-16 W | 60-100 W |
| PA1-1DE-MAS | 20-40 W | 60-100 W |
| PA1-1FE-MAS | 40-60 W | 60-100 W |
| VHF HIGH BAND 136-174 MHz | ||
| PA3-1AE-MAS | 1-5 W | 40-125 W |
| PA3-1BE-MAS | 2-10 W | 40-125 W |
| PA3-1DE-MAS | 5-25 W | 40-125 W |
| PA3-1FE-MAS | 10-50 W | 40-125 W |
| UHF 380-512 MHz (M=400-470 MHz) (H=470-512 MHz) | ||
| PA6-1AE-MAS | 1-5 W | 40-110 W |
| PA6-1BE-MAS | 2-10 W | 40-110 W |
| PA6-1DE-MAS | 5-25 W | 40-110 W |
| PA6-1FE-MAS | 10-50 W | 40-110 W |
| UHF HIGH BAND 806-960 MHz | ||
| *PA8-1ED-MAS | 50mW-1 W | 40-80 W |
| PA8-1DD-MAS | 4-8 W | 40-80 W |
| PA8-1FD-MAS | 15-30 W | 40-80 W |
| One rack frame required per five amplifiers. | ||
| *Input level must be specified at time of order. | ||
| FEATURES | |
| • | Capable of housing five slide-in units in a 19" rack mount configuration. |
| • | Accommodates all bands from 29.7 MHz to 960 MHz. |
| • | Forced air cooling with two thermostatically controlled fans for each amplifier module. |
| • | 100% duty cycle operation. |
| • | Trunking, Repeater, or base station operation (with solid state antenna switch relay option). |
| • | Front panel circuit breaker/on-off switch. |
| • | LED indicators for DC and RF Power. |
| • | Power Supply modules have Power On and Fault LED indicators and 5 Amps auxiliary terminals to power an exciter, etc. |
| SPECIFICATIONS | |
| Power Input | Standard TPL amplifier input levels, optional 10mW or less. |
| Power Output | Up to 125 Watts |
| Frequencies | VHF Low Band, VHF High Band, UHF, 806-960 MHz |
| Mode | FM/CW (Linear available in some models) |
| Voltage | 13.8 VDC, 120 or 240 VAC with optional Power Supply |
| Current, DC Operation | Model dependent. |
| Harmonic & Spurious Attenuation | Exceeds FCC and IC specifications |
| RF Connectors | Type "N" or D-SUB Blind-mate (optional) |
| In/Out Impedance | 50 Ohms |
| Operating Temperature | -30 to +50 degrees C |
| Duty Cycle | Continuous (100%) |
| Size, Amplifier Assembly | 19" W x 7" H x 14" D (up to five modules) |
| Size, Power Supply Assembly | 19" W x 5 1/4" H x 15" D (up to five modules) |
| Warranty | Three years parts and labor |
The MAS (Multiple Amplifier Series) of RF Power Amplifiers is designed for system integrators.
It is designed to house up to five vertical slide-in amplifiers in a 19” horizontal rack, while using only 7” of vertical rack space.
This package system accepts any TPL amplifier from VHF Low Band through 960 MHz with output levels up to 100 watts. Each amplifier module has a circuit breaker/on-off switch located on the front panel, along with two LED indicators for DC and RF Power, and two cooling fans. The rear panel has discrete connectors for RF and DC. blind-mate D-SUB connectors for all connections are also available upon request. As an accessory, a power supply unit with the ability to house up to five power supplies is available in a 5 1/4" high by 19" wide rack mount enclosure (MAS-PS), with an additional 5 Amps DC auxiliary terminal available per power supply to power an exciter, etc.
| MAS-PS | |
|---|---|
| As an accessory a power supply unit with the ability to house up to five power supply modules is available in a 5 ¼” H x 14 ½” D x 19”W enclosure. Each power supply module has power on and fault LED indicators and a 5 amp auxiliary terminal to power an exciter. | |
| MAS-PS12-1 | Power Supply chassis with one 13.8 VDC power supply module installed |
| MAS-PS12-2 | Power Supply chassis with two 13.8 VDC power supply modules installed |
| MAS-PS12-3 MAS-PS12-4 |
Power Supply chassis with three 13.8 VDC power supply modules installed Power Supply chassis with four 13.8 VDC power supply modules installed |
| MAS-PS12-5 | Power Supply chassis with five 13.8 VDC power supply modules installed |
| MAS-PS12 | Individual 13.8 VDC power supply module |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
